Operation panel and instructions
：
Button
Instruction for the buttons
1.Single button instruction:
ON/OFF
Turn on or turn off machine
SPEED
Adjust speed to high or low
HEAT
Press this button and the machine will go into heating function
COOL
Press this button and the machine will go into cooling function
Increase temperature
Decrease temperature
2. Combined button instruction
▼+SPEED
Display current ambient temperature(Press these 2 buttons for 3
seconds at same time)
▲
+SPEED
Display coil temperature (Press these 2 buttons for 3 seconds at same
time)
▲
+
▼
Press these two button at the same time for 5 seconds,then turn to
button
▼
,click once,it appears ON,the A/C will work with the water
tank;click
▼
again,it appears OF,the A/C will work with pipe
draining.And click SPEED,it exit.
Function Description
:
1.
Temperature control
：
When the machine reaches the set temperature, it will stop working automatically
；
2. Protection function
：
⑴
Compressor once stopped, it needs 3 minutes to re-start
；
⑵
When water tank is full, compressor will stop working
；
3.About Defrosting:
⑴
Auto-defrosting:when the inside temperature sensor detect the temperature of the coil is -1/0
degree for at least half an hour,then the compressor will stop working automatically,but the fan still
working,so it starts defrosting through the fan for about 15 minutes.
