7
Filter
Knob
Disassembling
Filter
First, remove the knob holding the filter, then
slide it in the direction of the arrow to disengage
from the catches.
NOTE
: As the filter may have grease built-up,
be careful when removing it.
Cleaning
Filter
After immersing the filter in warm water with
a mild detergent for 30 to 40 minutes, wash
it with a soft brush or the like to remove dirt.
Clean the filter frequently to avoid grease
build-up, which is difficult to clean.
Front Cover
After wiping the front cover off with a cloth
immersed in a mild detergent, wipe off
moisture thoroughly with a dry cloth.
Do not accessably rub the front cover as
it may cause damage to coating.
Re-assembling
Re-assembly will be done by following the disassembly procedure in reverse order
described in Item “disassembling”.
(1) Make sure that the filter is fixed in the appropriate position firmly.
(2) Make sure that there is no abnormal vibration sound when running.