10
Installation
5mm
Washer-head
wood screw
(Ø5.1×45)
Hanging screw
(Ø5.1×35)
Washer-head
wood screw
(Ø5.1×45)
Duct cover
fixing bracket
8.5~9.5mm
465
24
30
15
20
840
300
360
383
1) Refer to the figure below, insert two washer-
head wood screws (Ø5.1×45) in the bolt hole
position (
) 5mm distance into the wall.
2) Insert two hanging screw (Ø5.1×35) in the bolt
hole position (
) and screw it firmly.
* Hanging screw is screwed into the degree
incapable of being embedded into the wall. If
the screw is embedded into the wall, cooker
hood can be not installed.
3) Duct cover fixing bracket and the fittings
mounting position (
).
Insert two duct cover fixing brackets and two
washer-head wood screws (Ø5.1×45).
* Please note to align at the center of cooker
hood during installation.
Cooker Hood Installation
