14
Installation
Mounting screw
(M4×10)
Flat-head screw
(M4×8)
Flat-head screw
(M4×8)
Duct cover
fixing bracket
Slide duct cover
1) Slide the duct cover to
shelter the main unit,
and the duct (2 sites at
left and right) downside
the rear end of the duct
cover that is hung on
the hanging screw of
the main unit.
* Note to not damage
the product during
installation.
2) Lower part in front side of the duct cover
is fixed on the cooker hood via 2 mounting
screws (M4×10).
3) The sliding potion inside the duct cover
is stretched to the ceiling part and fixed
on the duct cover fixing bracket via 2 flat-
head screws (M4×8).
Duct cover
Loophole
Hanging
screw
Duct cover
Loophole
Hanging
screw
(Ventilating type)
(Recycling type)
Fixing Duct Cover
* When using a slide duct sold separately
Please dispose of the slide duct packaged with the product and use the slide duct that is
sold separately.
Please be sure to keep the mounting screws and attachment bracket for the duct cover that
were used for the slide duct removed as you need to use them to attach the new slide duct.