20
Operation
For safety sake, when rectifier panel is opened, the product stops running under running condition, and
makes the "bleeping" warn.
And furthermore, if installation status of the rectifier panel is abnormal, all operation switches are locked
excepting for lamp switch.
When it is in lock state, the on/off light and the air flow light will be flickered alternately.
Rectifier panel is under open state...
Press the operation switches beyond the lamp switch, make "bleeping" warn and the timer display lamp
flashes. Reject the indication of the operation switch.
* When rectifier panel is in open state or disassembly state, cooker hood is not running.
Operation Shutdown State and Structure Principle
The sensor at the rear end of the rectifier panel monitors the on/off state of the rectifier panel.
Under the following state, cooker hood stops running.
Restarting
Rectifier panel is installed properly
Please refer to page 24.
Operate various functions again
After installing rectifier panel, operate various functions
again according to requirements.
Hanging
Remove
Magnet
Sensor
(refer to the figure below)
Open
Operation shutdown
(Rectifier panel is open)
(Rectifier panel is hanging)
(Rectifier panel is removed)
Under normal use
(sensor is connected with magnet)
Magnet
(inside the cover)
Sensor
Note
Please do not dismantle the magnet on the rectifier panel. Additionally, please do not make other
magnet and magnetic object close to the sensor.
Note
When rectifier panel is not mounted well,
cooker hood is not running.
After installing rectifier panel, operation is
available again and fan is running. Please
note it when installing.
Automatic Shutdown