23
Caution f
or Maintenance
Removal of oil tray
1) Use your hand to support the part near the handle
sign ( ) of the oil tray, and at the same time, slightly
pull the oil tray fixing plate towards your body to
dismantle it from the main body of the cooker hood.
2) In order to avoid the scattering of the oil and water
in the oil tray, hold the part near the handle sign with
your hands, note to keep it horizontal while pulling
towards your body to dismantle it from the main body
of the cooker hood.
* The oil collected by the disk is stored in the oil
tray, and the accumulating stock varies from the
service condition. Although the amount is small, it
is normal.(Oil tray has the function of preventing the
oil collected by the disk from scattering.)
Note
If there is accumulated oil in the oil tray while dismantling,
please note the dripping of oil.
Handle sign ( )
Oil tray
Oil tray
fixing plate
Removal of disk
Press the detach button in the center of the disk
while pulling it out.
Note
Please do not drop out the disk to avoid deformation.
(Or, it causes noise and vibration.)
Detach button
Disk
Installation of disk
Take the disk and do not press the detach button,
insert the back groove into motor shaft to push it
upward till a sound of "crack" is heard.
After installation, slightly pull the disk confirm
whether it is fixed firmly.
Note
Please fix the disk completely. Incomplete
installation will cause falling off.
Fully wipe the water in the insertion portion of
the motor shaft while cleaning to dry it, and then,
carry out installation.
Please do not wipe the lubricating oil on the
motor shaft. The lubricating oil prevents motor
shaft from rusting.
Motor shaft
Disk
Crack
Do not press
the detach button
Back of the disk
Groove
Shaft bolt
Make the groove on
the back of the disk
aligning at the bolt of
the motor shaft for
insertion.
Coating parts of
lubricating oil
Motor shaft
Don't wipe
the grease off
