10
Installation
Soft tape
Fixing screw
(M4×8)
4
Fixing the exhaust port
(FR-FS2270/90VP only)
Firmly fix the supplied exhaust port by fastening the supplied
fixing screws (M4×8).
Then attach the supplied soft tape around the supplied exhaust
port.
Correct
Wrong
Note
When attaching the exhaust port, pay
attention to its shutter opening direction.
If it's installed incorrectly, it may cause
bad discharge, abnormal noise, etc.
Note
Incase reinforcement is required, arrange it through the installation
service provider.
1
Screw in washer-head wood screws on the wall
Referring to “Confirmation of the installation location” on page 8, insert
the supplied washer-head wood screws (
∅
5.1×45) into the mounting wall
for the left and right keyholes of the mounting bracket. Allow about 5mm
space between the wall and screwheads for hanging the cooker hood.
Washer-head
wood screw
（
∅
5.1×45
）
Keyhole
5mm
2
Mount the cooker hood
1) Hook the keyholes of the cooker hood on
the supplied washer-head wood screws, and
tighten the screws.
Washer-head
wood screw
Washer-head
wood screw
（
∅
5.1×45
）
2) Fasten the 2 supplied washer-head wood
screws (
∅
5.1×45) on the rear of the cooker hood
securely.
Cooker hood installation
Wall-mounted installation
