11
Ins
talla
tion
5. Please ensure that breaker is in "o
ff
"
position,and then,plug power supply
into the socket.
Note
When you connect power plug,
please be sure to turn o
ff
the breaker
of switchboard.
6. Assemble the duct cover fixing bracket
and 2 ST4.2×9.5 flat head flat head screws
to duct cover.
Duct Cover
Fixing Bracket
ST4.2×9.5
Flat head screws
Duct Cover
7. Insert slide duct cover from the top
into the gap between duct cover fixing
bracket by laterally bending towards
the inside of duct cover.
Duct Cover
Slide Duct Cover
Duct Cover
Fixing Bracket
For the Ventilating type, as shown in the right figure,
cut the flexible tube duct to the required length and
shrink it before installing the flexible tube duct .
(Applicable to ventilating type)
Flexible Tube Duct
Taping with non-flammable
materials
(Aluminum tape,etc.
）
8. Assemble the combination of duct cover
and slide duct cover to the main unit.
While assembling please, fit the lower part
of the duct cover combination unit first
while supporting the upper part to avoid
the falling of combination unit.
Slide Duct Cover
Duct Cover
Main unit
The longer the exhaust pipe, the worse the ventilation
performance. Straighten the exhaust pipe as much as
possible. The more turns, the worse the ventilation performance.
80
15
70
90
Power supply
installation location
Ventilating type
Note
