background image

4

Dimensions

125

127

500

500

460

70

75

20

600 700 900

600

400

520

85

148

R3

R9

12

460

Power plug
Length : 1m

(Unit: mm)

Standard Mounting Height

Mount the cooker hood at a place where more than 
800mm between the top surface of the gas hob and 
the bottom of the cooker hood. (800mm for optimum 
performance.)

(optimum perf

or

mance)

800 or more 

520

(Unit: mm)

Preparation and Check before Mounting

 Installation

1.  Mount the cooker hood carefully and avoid contact 

with any metal parts (the lath in the wall or the like) of 

the building.

2.  Never embed the body of the cooker hood in the wall. 

Otherwise, leakage current in the wall, if any, flows to 

the body of the cooker hood.

3.  The air must not be discharged into a flue that is used 

for exhausting fumes from appliances burning gas 

or other fuels (not applicable to appliances that only 

discharge the air back into the room).

4.  The minimum distance between the supporting surface 

for the cooking vessels on the hob and the bottom of 

the cooker hood. When the cooker hood is located 

above a gas appliance, this distance shall be at least 

800mm.

 

If the instructions for installation for the gas hob specify 

a greater distance, this has to be taken into account.

 

CAUTION

5.  Use a gas range having a narrower width than that of 

the cooker hood.

6.  Avoid using the cooker hood with changes in the 

specification, for instance, with modifying the switch.

7.  Do not install the cooker hood in a wet area or in 

other wet rooms since it may result in electric shock or 

damage.

8.  Do not install the cooker hood at a place where its 

ambient temperature exceeds 40°C, otherwise it may 

result in failure.

9.  To protect your hands from injury, wear working gloves 

when installing the cooker hood.

10.  If the power cord is damaged, it must be replaced by 

the manufacturer or its service agent or a similarly 

qualified person in order to avoid a hazard.

11.  If it's possible to touch the fan when inserting hand 

from the outer port of the exhaust duct because 

its length is rather short, take some measures for 

preventing from inserting hand.

Summary of Contents for GFP-600









Reviews: