9
Installation
Washer-head
Wood screw
5
Fix the body
Put 2 washer-head wood screws
(
∅
5.1
×
45) to the rear of the body and
tighten them securely.
6
Connection of duct and exhaust port
Connect
∅
150 flexible tube duct or the like
with the exhaust port.
Make the exhaust port secure and air-tight
using non-flammable tape such as aluminium
tape, etc. (not supplied)
Note
The longer the exhaust duct, the lower the ventilation.
Frexible tube duct
Taping with non-flammable
materials (Alminum tape etc.)
Note
In order not to drop the rectifier panel,
hold it by both hands securely. If
dropped, it may be a cause of injury,
flaw or warp of parts, etc.
4
Removing rectifier panel
Loosen the mounting screws attaching
the rectifier panel, move the rectifier
panel upward slightly to free the
mounting screws from the mounting
guide holes and the body catches.
Rectifier panel
Mounting guide hole
Mounting screw
Catch