10
Care and Maintenance
Replacing the Light Bulb
Loosen
Loosen
Tighten
Tighten
Lamp cover
1
Open the lamp cover
Loosen 2 screws fixing the lamp cover and open it.
3
Close the lamp cover
Close the lamp cover and fix it with the screw.
A 40 Watt mini-light bulb has been mounted to this cooker hood.
Prior to replacing the light bulb, purchase a bulb (in the base diameter 14mm),
rated 220V/230V/240V 40 Watt or below.
Install
Uninstall
2
Replace the lamp
Turn the lamp counter-clockwise to remove, and
replace it with a new one.
Note
To avoid burns, wait until the lamp is cooled off when
replacing it.
* When replacing the lamp is finished, be sure to return the power supply as before;
connect the power plug to the wall receptacle, or switch on the breaker.
Note
Before replacing the lamp, be sure to disconnect the power plug from the wall receptacle,
or switch off the breaker.
Note
When replacing, be sure to use a same voltage bulb with the power voltage supplied.
