9
Care and Maintenance
1
Slot Filter
While holding the knob screw, set the rear of the slot filter in the groove of
the cooker hood, then lift up its front and tighten the knob screw.
Tighten knob screw
Filter
Groove
2
Make sure
it is locked
Rectifier panel
1
Hanging
bracket
Hooking
bracket
* When cleaning is finished, be sure to return the power supply as before;
connect the power plug to the wall receptacle, or switch on the breaker.
2
Rectifier Panel
1) Engage the rear left and right hooking
brackets of the rectifier panel securely
with the hanging brackets.
2) While holding the rectifier panel by both
hands, lift up its front and push upward
until it is locked by the left and right
stoppers. After attaching, make sure
not to unlock easily by shaking it up
and down.
Note
Make sure that the rectifier panel is locked
securely. It may be a cause of dropping if
not locked firmly.
Attaching Cleaned Parts
