7
Installation
4
Preparing exhaust duct
1) Referring to "Dimensions" on page 5, make a hole on the wall for exhaust duct.
2) Set
∅
150 stainless or spiral duct to the top of the cooker hood as shown, and perform finish
work around it. (In case of the concrete, tile, and mud wall.)
30~50
135
60
Center line
5
Attaching exhaust port
1) Stick the supplied soft tape on the exhaust port.
2) Insert the exhaust port to the insertion slot on the
top of the cooker hood, and fix it using 2 screws.
(The screws are supplied with attaching near the
insertion slot.)
Soft tape
Note
When attaching the exhaust port, pay attention to its shutter opening direction.
If it's installed incorrectly, it may cause bad discharge, abnormal noise, etc.
Fixing screw
Insertion slot
Shutter opening
direction
(Unit: mm)
3
Checking accessory parts
Take out the main unit and accessory parts (exhaust port, duct cover, etc.)
from the packing box, and check whether there is any shortage.
Summary of Contents for NL-900V
Page 12: ......
