8
Installation
Rectifier panel
Push the
stopper
2
Thrust
a little
Open about 10cm
1
3
Hooking
bracket
Hanging bracket
4
Loosen screw
to remove the filter
Filter
6
Removing rectifier panel
While holding the rectifier panel by both hands, thrust it a little (
1
) and push the left and right
stoppers to unlock (
2
), pull it slowly to open about 10 cm (
3
), then push it up and backward to
disengage from the hanging brackets (
4
).
7
Removing slot filter
While holding the slot filter by hand, loosen the knob screw
and open its front a little to take it out to the arrow direction.
Cooker Hood Mounting
1
Screw in washer-head wood screws on the wall
Referring to "Dimensions" on page 5, insert the washer-head
wood screws (
∅
5.1
×
45) into the mounting wall (temporary fixing
holes, left and right). Allow about 5mm between the screwheads
and wall for mounting the cooker hood.
Washer-head
wood screw
Temporary
fixing hole
5mm
Summary of Contents for NL-900V
Page 12: ......
