Installation of Exhaust Outlet
3
Installation of the machine
4
The installation of flexible tube duct
5
Installation of Slide Duct Cover
6
Install the exhaust outlet components together with the exhaust
the blade is rotating flexibly.
Align the hole in the rear of the body to the hanger of the
the cooker hood, confirm the installation level of the
machine.Hold the limit block against the machine and
If the flexible tube duct is too long, please adjust the long
tube to the contraction state and fix it with adhesive tape
to prevent the pipe from swinging during the working process.
According to the installation height and duct cover fixing
bracket mounting holes, drill 2 holes in the wall with 10mm
diameter and 50 to 60mm depth, the plastic expansion
pipe pressure inside the hole, provided with 2 M5 x50
cross - groove countersunk head wood screw will cover
duct cover fixing bracket reliable fixation. the slide duct
cover to the corresponding height, and use the 2
ST4.2 x 9.5 screws on the duct cover fixing bracket.
Hang hole
The hanging
2
3
4
5
6
7
8
9
11
12
outlet sealing gasket in the position of the rack outlet, tighten
with 4 ST4.2 x 16 screws , check and make sure that
Exhaust outlet
Exhaust outlet sealign gasket
hanging bracket, and hang it from the top down. After hanging
Flexible Tube Duct
Exhaust Outlet
Slide Duct
Cover
Duct Cover
Fixing Bracket
bracket
9
Limit block
and fix the limit block reliably with ST5 x 45 screw to
prevent the machine from falling off accidentally.
Set one side of flexible tube duct in the exhaust outlet
with 2 ST2.9x9.5 as shown, and wrap the aluminum foil
tape around the installation joint of the exhaust outlet
and the flexible tube duct. Then connect the other side
of the flexible tube duct to the outdoor or public flue.
Summary of Contents for FR-LT2290V
