Color monitor 461V FA
A26361-K708-Z100-2-5E19
English - 9
Connecting cables to the monitor
The monitor ports are protected by a cover.
1
2
3
4
5
1 = Cover lever
2 = Power-adapter connection socket (DC 18V)
3 = D-SUB connector
4 = DVI-D connector
5 = Power connector
Ê
Press the cover levers (1) upwards and remove the cover.
The data cable supplied has two 15-pin D-SUB connectors for the D-SUB connector of the monitor
and of the computer.
Ê
Connect one of the D-SUB connectors of the data cable to the D-SUB connector on the
monitor (3) and secure the plug-in connection by tightening the safety screws.
i
If instead of the data cable supplied you want to use a data cable with DVI-D connector or
if you want to connect the monitor to a second computer, proceed as follows:
Ê
Connect the DVI-D connector of the data cable to the DVI-D connector on the
monitor (4) and secure the plug-in connection by tightening the safety screws.
Data cables with DVI-D connectors are available from specialised dealers.
After switching on the monitor you must select the desired input with the OSD menu (see
chapter "
Monitor settings using the OSD menu
").
Your monitor's power adapter is integrated in the monitor base. The power adapter cable is
permanently connected to the power adapter.
Ê
Connect the connector of the power adapter cable to the power adapter connector (2) of the
monitor and ensure a secure connection.
Ê
Connect the connector of the power cable supplied to the power connector (5) of the monitor
and ensure a secure connection.
Ê
Mount the cover over the connections again.
