Colour monitor 463V FA
A26361-K864-Z100-1-5E19
English - 9
Ê
Mount the cover over the connections again.
Connecting cables to the computer
Information on the computer connections and interfaces is contained in the operating manual for
your computer.
i
If your computer has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separate graphics card is usually active.
Ê
Connect the data cable to the (active) monitor port on the computer and secure the plug-in
connection by tightening the safety screws.
Ê
Connect the male receptacle of the power cable supplied to the monitor socket of the computer
and ensure a secure connection.
Ê
Plug the power connector of the computer into a properly grounded mains outlet.
i
When you start working with your monitor for the first time you should install the
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.
Operation of the monitor
The monitor offers the following possibilities that enable it to be optimally adjusted for the respective
user and the respective situation.
Adjusting rake and rotation
The rake of the monitor can be adjusted by –5°
(forward) and +20° (back) from its vertical
position.
Ê
Grasp the monitor with both hands on the
right and left edge of the casing and adjust
it to the desired rake.
The monitor can be rotated by
±
45° from its
centre position.
Ê
Grasp the monitor with both hands on the
right and left edge of the casing and rotate it
into the desired position.
Summary of Contents for 463V FA
Page 1: ...MONITOR com Betriebsanleitung Operating Manual 463V FA Deutsch English...
Page 3: ......
Page 8: ......
