Removing and installing components during servicing
58
10600690568, edition 1
Installing the hard disk
i
The hard drive frame is fitted with oblong slots, not normal screw holes. Depending to the
type of hard drive, the screws may have to be inserted into the slots either clockwise or
anti-clockwise.
The hard drive frame must be attached to the hard drive with 2 screws on either side.
2
2
2
2
1
►
Slide the hard disk (1) into the hard disk carrier.
►
Fasten the hard disk carrier with the screws (2).
2
1
3
3
3
Insert the hard disk at a slight angle into the hard disk tray in the direction indicated by the arrow (1).
►
Grasp the hard disk by the pulling aid and slide the hard disk in the direction of the arrow (2) to
plug the hard disk.
►
Fasten the screws (3).
