Removing and installing components during servicing
Please observe the safety information in the
chapter.
The notebook must be switched off when installing/removing the memory
modules; it must not be in Suspend mode.
Only use memory upgrades that are approved for your notebook. 256, 512 MByte
and 1 GByte modules DDR2-533 SO DIMM (PC2-4200); or 256, 512 MByte
and 1 GByte modules DDR2-667 SO DIMM (PC2-5300).
Never use force when installing or removing memory modules.
Make sure that foreign objects do not fall into the memory expansion compartment.
Memory modules are located underneath the service compartment. You must open the service
compartment to remove or install a memory module. Once you have removed the cover
various components will be exposed. These components should be removed and replaced
only by authorised specialists. Always observe the following precautions:
Individual components (e.g. the processor heat sink) can become very
hot during operation. Therefore, we recommend that you wait one hour
after switching off the notebook before removing or installing the memory
modules. This will prevent any risk of burn injuries.
As some components with ESDs are exposed, please observe the section
on installing and removing boards and components", Page 48
The second memory module is not accessible from the outside and must therefore only be
removed or replaced by an authorised Fujitsu Siemens Computers service partner.
►
Switch your notebook off.
►
Close the LCD screen so that it locks into place.
►
Remove the plug for the mains adapter from the mains socket.
►
Disconnect all cables connected to the notebook.
►
Place the notebook upside down on a
fl
at surface.
►
Remove the battery (see
"Removing the battery", Page 25
Removing the cover
1
2
►
Remove the screws (1).
►
Lift the cover off the notebook in the direction
of the arrow (2), working towards the centre .
10600771542, edition 1
51
Summary of Contents for AMILO Li Series
Page 1: ...Notebook English EasyGuide AMILO Li Series...
Page 3: ......
Page 10: ...Contents 10600771542 edition 1...