Connecting external devices
Connecting an external monitor
Monitor
VGAconnection socket
Screenport
Monitorport
You can connect two external monitors to the notebook at the same time.
An analogue monitor is connected to the analogue screen port, a digital monitor to the
DVI-D screen port. Screen output is limited to a maximum of two screens at any one time
(see
"Key combinations", Page 18
, section "Toggle output screen").
For connecting digital screens, only use screen cables with a DVI-D screen connection.
DVI-I screen adapters and screen cables must not be used! You will damage the
screen port or the screen cable because of the different pin occupancy!
If you are in any doubt, please seek comprehensive advice from your retailer.
Below you will
fi
nd a comparison of DVI-D and DVI-I connections:
DVI-D port
DVI-I port
Port
Symbol
Connecting a monitor
Digital DVI-D monitor port
Analogue monitor port
►
Switch off the notebook and the external monitor.
►
Connect the data cable of the external monitor to the monitor port of the notebook.
►
First switch on the external monitor and then the notebook.
10600906461, edition 1
51
Summary of Contents for AMILO Pi Series
Page 1: ...Notebook English EasyGuide AMILO Pi Series...
Page 3: ......
Page 10: ...Contents 10600906461 edition 1...