Removing and installing components during servicing
Removing the hard disk
►
Switch your notebook off.
Hard disk
►
Close the LCD screen.
►
Unplug the mains plug of the mains adapter from the mains socket.
►
Disconnect all cables connected to the notebook.
►
Turn your notebook over and place it on a stable, sturdy,
fl
at surface. If necessary, lay an
anti-slip cloth on this surface to prevent the notebook from being scratched.
►
Remove the battery (see
"Removing the battery", Page 12
).
3
2
1
1
►
Remove the screws (1).
►
Lift off the cover (2).
►
Pull the hard disk out of the bay in the
direction of the arrow (3).
Installing the hard disk
3
3
1
2
►
Push the hard disk into the hard disk
bay (1) in a straight line.
►
Position the cover (2).
►
Secure the cover with the screws (3).
►
Install the battery again (see
"Battery: inserting", Page 12
).
►
Turn the notebook the right way up and place it on a
fl
at surface.
►
Reconnect the cables that you disconnected previously.
18
A26391-K195-Z120-1-7619, edition 1