Connecting external devices
A26391-K168-Z120-1-7619, edition 2
53
Setting the refresh rate for your external monitor
The refresh rate must be correctly set so that the image does not flicker.
►
Select the monitor type in the menu
Start - Control Panel - Appearance and Themes - Display -
Settings - Advanced - Display
.
►
Adjust the refresh rate and then click
Apply
.
!
If the refresh rate set is too high, the monitor may be damaged. Please see the
documentation included with your monitor for the maximum possible refresh rate.
Connecting an external keyboard
You do not need to switch your notebook off.
►
Connect the external keyboard to the PS/2 port on the Port Replicator.
Connecting an external PS/2 mouse
You do not need to switch your notebook off.
►
Connect the mouse to the PS/2 port of the Port Replicator.
Using the parallel port
►
Switch the notebook off.
►
Connect the data cable of the printer to the parallel interface on the Port Replicator.
►
Plug the printer power cable into the mains outlet.
►
First switch the printer on, then the notebook.