Removing and installing components during servicing
Removing and installing the hard disk
Removing the hard disk
►
Switch the notebook off and pull the power plug out of the mains socket.
►
Close the LCD screen so that it locks into place.
►
Disconnect all cables connected to the notebook.
►
Turn your notebook over and place it on a sturdy,
fl
at surface.
►
Remove the battery (see
"Removing the battery", Page 26
).
Hard disk
2
1
►
Remove the screws (1).
2
4
HDD 2
1
3
►
Remove the screw (1).
►
Pull the hard disk by the pulling aid (2)
straight in the direction of the arrow (3).
►
Remove the hard disk from the hard
disk compartment (4).
►
Remove the two screws from the mounting plate.
Installing the hard disk
When installing the hard disk, ensure that the contacts in the hard disk
compartment do not bend or become damaged. Please observe the notes
in the operating instructions for the hard disk.
Hard disk
►
Attach the two screws to the mounting plate.
►
Insert the hard disk into the hard disk compartment - the hard disk must be straight.
1
2
HDD 2
3
►
Pull the hard disk by the pulling aid (1)
straight in the direction of the arrow (2)
until the contacts engage. If necessary,
use a
fi
nger to guide the left-hand edge
of the hard disk along.
►
Remove the screw (3).
10600718746, edition 1
53
Summary of Contents for AMILO Xa 1526
Page 1: ...Notebook English EasyGuide AMILO Xa Series...
Page 3: ......
Page 10: ...Contents 10600718746 edition 1...