background image

Colour monitor B15-1

A26361-K905-Z100-2-5E19

English - 5

If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

 

Reorient or relocate the receiving antenna.

 

Increase the separation between equipment and the receiver.

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

 

Consult the dealer or an experienced radio/TV technician for help.

Fujitsu Siemens Computers GmbH is not responsible for any radio or television interference caused
by unauthorised modifications of this equipment or the substitution or attachment of connecting
cables and equipment other than those specified by Fujitsu Siemens Computers GmbH. The
correction of interference caused by such unauthorised modification, substitution or attachment will
be the responsibility of the user.

The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC rules.

Disposal and recycling

This device has been manufactured to the highest possible degree from materials which can be
recycled or disposed of in a manner that is not environmentally damaging. The device may be taken
back after use to be recycled, provided that it is returned in a condition that is the result of normal
use. Any components not reclaimed will be disposed of in an environmentally acceptable manner.

If you have any questions on disposal, please contact your local office, our help desk, or:

Germany

Belgium

Switzerland

 

Fujitsu Siemens Computers
GmbH
Remarketing und Recycling
D-33106 Paderborn
Tel.: +49 5251 / 81 80 10

 

Fax: +49 5251 / 81 80 15

http://www.fujitsu-siemens.de/wvm

 

RECUPEL
Boulevard Reyers, 80
B-1030 Brussels
Tel.: +32 2 / 706 86 16
Fax: +32 2 / 706 86 13

 

E-Mail: info@recupel.be

http://www.recupel.be

SWICO
Schweizerischer
Wirtschaftsverband der
Informations-,
Kommunikations- und
Organisationstechnik

A list of the SWICO
Acceptance places can be
found at:

http://www.swico.ch

 

USA

 

USA

Environmental Affairs
Electronic Industries Alliance
Jason Linnell, Manager
2500 Wilson Blvd
Arlington, VA 22201
Tel.: 703-907-7573
Fax: 703-907-7501
E-Mail: jlinnell@eia.org

North East Recycling Council
Lynn Rubinstein
suite 401
139 Mainstreet
Brattleboro VT 05301
(T 802-254-3636)
(F 802-254-5870)
E-Mail: Lynn@nerc.org

Summary of Contents for B15-1

























Reviews: