Colour monitor C384FA-M
10 - English
A26361-K826-Z100-2-5E19
Ê
Connect the plug on the power cable supplied into a properly grounded mains outlet (4).
Ê
Plug the power connector of the computer into a properly grounded mains outlet.
i
When you start working with your monitor for the first time you should install the
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.
Connecting headphones
i
Headphones are not included in the consignment of the monitor.
Ê
Connect a pair of headphones to the headphones port
on the front of the monitor if desired.
If you connect headphones, the built-in loudspeakers are disabled automatically.
Operation of the monitor
1
2
3
4
7
5
6
1 = Loudspeakers
2 = Volume control
3 = ON / OFF switch
4 = Power indicator
5 =
[Fn]
[Fn]
[Fn]
[Fn]
! "
buttons
6 =
[+/-]
[+/-]
[+/-]
[+/-]
! "
buttons
7 = Headphones port
Switching the monitor on/off
The ON/OFF switch (3) is used for switching the monitor on and off.
The power indicator (4) glows green when the monitor and computer are switched on. The power
indicator glows amber when the monitor does not receive a video signal or is in the energy-saving
mode. The power indicator goes off when the monitor is switched off.
When you switch on the computer system, you must proceed in the following order:
Ê
First switch the LCD monitor on with the ON/OFF switch (3).
Ê
Then switch on the computer.
