background image

錯誤

尚未定義樣式。

18

2

Indicator PC card 2

The indicator lights up when a PC card disk in slot 2 is being accessed.
You must not remove the PC card from the slot when this indicator is lit.

Hard disk indicator

The indicator lights up when the hard disk drive is being accessed.

Floppy disk drive indicator

The indicator lights up when a floppy disk in the floppy disk drive is being accessed.
You must not remove the floppy disk from the floppy disk drive when this indicator is lit.

Optical drive indicator

The indicator is lit when the CD/DVD in the optical drive is being accessed.
You must not remove the CD/DVD from the drive when this indicator is lit.

CapsLK

CapsLK indicator (Caps Lock)

The Ï key has been pressed. All the characters you type appear in uppercase. In the case
of overlay keys, the character on the upper left on the keycap appears when that key is
pressed.

ScrLK

Scroll indicator (Scroll Lock)

The [Scr] key has been pressed. The effect this key has varies from programme to
programme.

NumLK

NumLK indicator (Num Lock)

The key combination [Fn] + [Num LK] has been pressed. The numbers on the lower left on
keys in the integrated numeric keypad are enabled.

i

Information on the displays of the security panel is contained in the chapter "

錯誤

找不到參

照來源。

", in the section "

錯誤

找不到參照來源。

".

Keyboard

The following description of keys refers to Windows. Additional functions supported by the keys are
described in the relevant manuals supplied with your application programmes.

The figure below shows how to access the different characters on keys with overlaid functions. The
example applies when the CapsLK indicator is not lit.

Summary of Contents for CELSIUS H
















































Reviews: