SCENICVIEW P17-2 / P19-2 / P19-2P / P20-2 / P20-2S
12
A26361-K983-Z120-1-7619, edition 6
Connecting cables to the monitor
The monitor ports are protected by a cover.
►
Remove the cover.
P17-2 / P19-2 / P19-2P
P20-2 / P20-2S
i
On the P20-2 / P20-2S monitor, the DVI-D and D-SUB connectors (2 + 3) are the opposite
way round.
1 = Power connector
2 = DVI-D connection socket (DIGITAL) (P17-2 / P19-2 / P19-2P / P20-2 / P20-2S)
3 = D-SUB connection socket (ANALOG) (P17-2 / P19-2 / P19-2P / P20-2 / P20-2S)
4 = Security slot for "Kensington Lock"
5 = AUDIO-IN connector
6 = Cover position
7 = Holes for fixing swivel arm or wall bracket
8 = Main switch
The data cables supplied have two 15-pin D-SUB connectors / two 24-pin DVI connectors for
connection to the monitor and to the computer.
►
Select the suitable data cable for your computer.
Digital graphics card with DVI interface:
DVI connector
Graphics card with VGA interface:
D-SUB connector
Information on the computer connections and interfaces is contained in the operating manual
for your computer.
►
Connect one of the connectors of the data cable to the D-SUB connector (3) or the DVI-D
connector (2) on the monitor and secure the plug-in connection by tightening the safety screws.
i
The monitor automatically detects the input when only one signal source is connected.
