Operating the Pocket PC
28
A26391-K150-Z120-1-7619, Edition
3
Connecting PSC11R-050 power adapter to cradle with adapter
3
2
1
4
►
Connect the adapter (1) to the ActiveSync port of the cradle.
►
Connect the power adapter cable (2) to the adapter.
►
Connect the PSC11R-050 power adapter (3) to an electrical outlet.
►
Place the Pocket PC in the cradle (4).
The installed battery will now be charged. The power-on indicator (number 10 in the section
"Overview of operating elements and connections") flashes green.
The charging time is approx. 4 hours. When the battery is fully charged, the power-on indicator lights
continuously green.
Optimising battery operating time
When you have completely charged the battery, you can operate the Pocket PC for up to 10 hours
without a power connection. However, it is not possible to exactly specify the maximum operating
time, as different applications use more or less energy.
In the system settings you can make settings that help you save energy when using your
Pocket PC. These settings enable you to use the battery operating time optimally. Please see the
"Configuring the Pocket PC” chapter for information on how to save energy.
i
In the default setting, a setting is activated that automatically switches the Pocket PC into
the Suspend mode after three minutes when working without a power connection if no
entries are made during this time. You can switch on the Pocket PC again at any time by
briefly pressing the Suspend/Resume button and then continue working where you left off.
Monitoring battery charge level
You can display the battery charge level under
Start - Settings - System - Power
.