Operating the Pocket PC
A26391-K150-Z120-1-7619, Edition 3
31
If the battery charge level of your Pocket PC is low, you should connect the PSC11R-050 power
adapter (see the section "Connecting PSC11R-050 power adapter").
Synchronising data with new PC/notebook
If you want to synchronise data with a new PC/notebook, you must first install
ActiveSync
on this new
PC/notebook and establish a new ActiveSync partnership (see the corresponding explanation in the
section "Initial start-up").
Backing up data with FSC Backup
The Pocket PC saves your data such as appointments, addresses, things to do and notes, as well
as all documents in the RAM memory of the device. These data are backed up to your PC during
synchronisation with ActiveSync. However, to also make current data backups away from home or
while on business trips, there is
FSC Backup
.
FSC Backup
backs up an image of the RAM memory of your Pocket PC on a memory card ("Secure
Digital I/O" or "MultiMediaCard") or in the integrated memory area, the LOOXstore (if this memory
area exists). If your Pocket PC has experienced a power failure and the data from the RAM memory
have been deleted, then you can restore a data backup you have made with
FSC Backup
. This
provides you with the data status at the time of the backup again within just a few minutes.
As
FSC Backup
backs up and restores the entire RAM memory of your device, the registry, which
contains the configuration data of your device and any programs installed in the RAM memory, is
also backed up.
FSC Backup
also provides you with the option of backing up and restoring single databases such as
contacts, calendar or tasks as well as your connection settings. You will find information as to how
you proceed for this in the
FSC Backup
help file on your Pocket PC.
Before you start a backup, make sure that sufficient memory space is available on the memory card
or in the device, and that the battery holds a sufficient charge. If the battery charge level is low,
connect the PSC11R-050 power adapter to charge the battery.
!
When you conduct a backup, you may not carry out any other operating procedure before
the backup has been completed. Do not press any keys, touch the display or remove a
memory card.
Backup
►
Select
Start - Programs - FSC Backup
.
►
When the screen of the
FSC Backup
program appears, select a destination for the backup.
Select the entry
SD-MM Card
for a memory card.
►
Tap
on
the
Backup
button.
A message is output when the backup has been completed.
►
Touch
OK
(navigation bar) to confirm your setting.
The screen of
FSC Backup
appears again on the display.
