background image

SCALEOVIEW H17-1/H19-1/H19-1W 

 

Disposal and recycling 

This device has been manufactured to the highest possible degree from materials which can be 
recycled or disposed of in a manner that is not environmentally damaging. The device may be taken 
back after use to be recycled, provided that it is returned in a condition that is the result of normal 
use. Any components not reclaimed will be disposed of in an environmentally acceptable manner. 
If you have any questions on disposal, please contact your local office, our help desk, or: 

Germany Belgium  Switzerland 

Fujitsu Siemens Computers 
GmbH 
Remarketing und Recycling 
D-33106 Paderborn 
Tel.: +49 5251 / 81 80 10 
Fax: +49 5251 / 81 80 15 

http://www.fujitsu-siemens.de/wvm

RECUPEL 
Boulevard Reyers, 80 
B-1030 Brussels 
Tel.: +32 2 / 706 86 16 
Fax: +32 2 / 706 86 13 
E-Mail: info@recupel.be 

http://www.recupel.be

SWICO 
Schweizerischer 
Wirtschaftsverband der 
Informations-, 
Kommunikations- und 
Organisationstechnik 
A list of the SWICO 
Acceptance places can be 
found at: 

http://www.swico.ch

Checking the contents of the consignment 

The display surface of the LCD monitor is sensitive to pressure and scratches. Always 
hold the device by the casing! 

!

 

 

 

Unpack all the individual parts. 

 

Check the delivery for damage incurred during transportation. 

 

Check whether the delivery agrees with the details in the delivery note. 
The complete LCD monitor package includes: 
– one 

monitor 

– 

one monitor base 

– one 

cover 

– 

one data cable (D-SUB) 

– 

one data cable (DVI-D: H17-1/H19-1) 

– 

two audio cables 

– 

one USB cable for the computer 

– 

one power cable 

– one 

CD 

– 

one Warranty Booklet 

– 

one "Getting Started" manual 

Should you discover that the delivery does not correspond to the delivery note, notify your local sales 
outlet immediately. 

 

We recommend that you keep the original packaging material. You may need the 
packaging in the future if you need to transport your device. 

i

 

 

A26361-K1086-Z120-1-7619, edition 2 

Summary of Contents for SCALEOVIEW H17-1


































Reviews: