SCALEOVIEW
H17-1/H19-1/H19-1W
Setting display of the OSD menu
Calling the
OSD Setup
setting window
Setting language for the OSD menu
With this function you select the language for the OSD menu. The following
languages are offered:
French Swedish
English (default setting)
Spanish Dutch
Language
English Italian Russian
OSD
H-Position
Setting the horizontal position of the OSD menu
With this function you move the OSD menu to the left or to the right.
OSD
V-Position
Setting the vertical position of the OSD menu
With this function you move the OSD menu up or down.
OSD
Timeout
Setting the display duration of the OSD menu
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is automatically
faded out.
Setting functions in the "Advanced" menu
Calling the
Advanced
setting window
Input Select
Selecting input signal
With this function you switch the monitor from the analogue to the digital mode and
vice versa, when two signal sources are connected (H17-1/H19-1).
The condition is that the graphic card used supports this function.
Resolution
Notifier
Displaying monitor data
The optimum resolution for the H17-1/H19-1 monitor is 1280 x 1024 pixels (H19-
1W: 1440 x 900). With the function activated (
On
), a message appears on the
screen after approx. 30 seconds if a different resolution is set.
Change the resolution to 1280 x 1024 (H17-1/H19-1), 1440 x 900 (H19-1W) to
achieve optimum picture quality. With the function deactivated (
Off
), no message
appears.
Factory Recall Activating the factory settings
With this function all settings are reset to the factory settings without prompting for
confirmation.
Press the SELECT/MENU button to activate the function. The
Auto Processing
message is displayed.
A26361-K1086-Z120-1-7619, edition 2
17
