A26361-K636-Z100-9-7619
7
Preparing for use
!
Please take note of the safety information in the "Important notes" chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be required for
reshipment at some later date.
Ê
Unpack all the individual parts.
Ê
Check the delivery for damage incurred during transportation.
Ê
Check whether the delivery agrees with the details in the delivery note.
Should you discover that the delivery does not correspond to the delivery note, notify your local
sales outlet immediately.
Steps for initial setup
The software provided is configured during initial start-up.
i
External devices
If you have received other devices in addition to your PC (e.g. a printer or a modem), do
not connect these until after the initial installation. Connecting these external devices is
described in the section "Connecting external devices".
Drives and boards
If you have received drives or boards with your PC, please do not install them until after
first-time setup. How to install drives and boards is described in the "System expansions"
chapter.
Perform the following steps in the prescribed order:
1.
Decide where you are going to use the PC, and then set it up.
2.
Connect the monitor, mouse and keyboard to the PC.
3.
Connect any other devices (e.g. printer, modem) to the PC.
4.
Check the rated voltage of the PC and connect it to the mains voltage.
5.
Switch the PC on and follow the instructions on the screen.
