background image

SCENICVIEW A20W-3/A22W-3 

 

Energy Star Guidelines 

The Fujitsu Siemens LCD monitor SCENICVIEW A20W-3/A22W-3 is 
designed to conserve electricity by dropping to less than 1 W when it goes 
into standby, suspend and OFF mode. With this new power management 
the LCD monitor SCENICVIEW A20W-3/A22W-3 qualifies for the U.S. 
Environmental Protection Agency's (EPA) Energy Star Computers award. 

 

The EPA estimates that computer equipment uses 5 % percent of all business electricity and that 
this is growing rapidly. If all desktop computers and peripherals enter a low-power mode when not in 
use, the overall savings in electricity could amount to $ 2 thousand million annually. These savings 
could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere - the 
equivalent of 5 million automobiles. 
As an Energy Star Partner, Fujitsu Siemens Computers GmbH has determined that this product 
meets the Energy Star guidelines for energy efficiency. 

Disposal and recycling 

This device has been manufactured to the highest possible degree from materials which can be 
recycled or disposed of in a manner that is not environmentally damaging. The device may be taken 
back after use to be recycled, provided that it is returned in a condition that is the result of normal 
use. Any components not reclaimed will be disposed of in an environmentally acceptable manner. 
If you have any questions on disposal, please contact your local office, our help desk, or: 

Germany Belgium  Switzerland 

Fujitsu Siemens Computers 
GmbH 
Remarketing und Recycling 
D-33106 Paderborn 
Tel.: +49 5251 / 81 80 10 
Fax: +49 5251 / 81 80 15 

http://www.fujitsu-siemens.de/wvm

RECUPEL 
Boulevard Reyers, 80 
B-1030 Brussels 
Tel.: +32 2 / 706 86 16 
Fax: +32 2 / 706 86 13 
E-Mail: info@recupel.be 

http://www.recupel.be

SWICO 
Schweizerischer 
Wirtschaftsverband der 
Informations-, 
Kommunikations- und 
Organisationstechnik 
A list of the SWICO 
Acceptance places can be 
found at: 

http://www.swico.ch

Asia USA  

Taiwan: Environmental 
Protection Administration 
Executive Yuan R.O.C. 
 

http://recycle.epa.gov.tw/

Fujitsu Siemens  
Computers Inc. 
1250E. Arques Avenue 
Sunnyvale, CA 94085 U.S.A. 
Contact: Schroettle-Henning, 
Bernd 
Phone No.: (408) 834-0306 

 

Fax No.: (408) 746-8299 

 
You can find more information on the Internet at 

www.fujitsu-siemens.com/recycling

A26361-K1177-Z120-1-7619, edition 1 

Summary of Contents for SCENICVIEW A20W-3



































Reviews: