Operation
Notes on power management
If your computer is equipped with power management, the monitor can support this function
fully. The monitor does not distinguish between the individual power management modes of
the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately
switching into the mode with the highest energy-saving effect.
Stage
ON
Power management mode
Power indicator
lights up blue
lights up orange
Function
the monitor is working normally the screen is dark
Power consumption (typical)
Normal
< 32 W typical (17")
< 37 W typical (19")
reduced to < 1 W
If your computer detects inactivity (no input) it sends an appropriate signal to the monitor
to reduce the power consumption (power management mode). The power indicator of
the monitor changes colour to indicate the status change.
Once an input is made at the computer the screen contents are redrawn.
For detailed information on how power management mode operates refer to
the operating manual or technical manual of the computer.
When the monitor is switched to the power management mode by the power
management system a power consumption of up to 1 W is maintained to
feed the circuit for redrawing the screen contents.
To completely switch off the power consumption, switch off the monitor
with the main switch at the rear.
Changing the monitor settings
When putting the monitor into operation for the
fi
rst time, the screen display should
be optimally adapted to the display adapter used.
A26361-K1255-Z120-1-7619, edition 1
15
