Colour Monitor
SCENICVIEW P17-1A
12 - English
A26361-K960-Z101-1-5E19
Operation of the monitor
The monitor offers the following possibilities that enable it to be optimally adjusted for the respective
user and the respective situation.
Adjusting height, rake and rotation
The monitor height can be adjusted within a range of approx. 2.5 inch/50 mm.
►
Grasp the monitor with both hands on the right and left edge of the casing and move it upward
or downward.
15°
5°
90°
The rake of the monitor can be adjusted by -5°
(forward) and +15° (back) from its vertical
position.
►
Grasp the monitor with both hands on the
right and left edge of the casing and adjust
it to the desired rake.
The monitor can be turned 90 horizontally in a
clockwise direction from its central position.
►
Grasp the monitor with both hands on the
right and left edge of the casing and rotate
it into the desired position.
Adjusting portrait format
The monitor can be turned from the "wide format" (landscape mode) into the "high format" position
(portrait mode).
►
Grasp the monitor with both hands on the right and left edge of the casing, move it into the
highest position and turn it clockwise until it is in the portrait position.
i
You must use corresponding software (pivot software) so that the screen display is also
shown in the portrait mode. This software is included in the delivery (CD-ROM) and must
be installed on your computer.
In the OSD menu you have the option of switching the OSD manually from landscape
mode into portrait mode (see also the section "Monitor settings using the OSD menu").
To reset the monitor to the landscape mode, the monitor must be turned counter-clockwise. The
OSD display can be reset again in the OSD menu.
Summary of Contents for SCENICVIEW P17-1A
Page 1: ...Betriebsanleitung Operating Manual Monitor SCENICVIEW P17 1A Deutsch English answers2...
Page 3: ......
Page 8: ......
