Fujitsu Siemens Computers SCENICVIEW P17-1A, Operating Manual

A26361-K960-Z101-1-5E19

English - 1 

Introduction 

Your new LCD (Liquid Crystal Display) monitor SCENICVIEW P17-1A offers numerous features and 
functions, for example: 

●

TFT display (Thin Film Transistor; active matrix) 

●

minimal space requirements thanks to slim casing 

●

optimum ergonomic characteristics (totally distortion-free, excellent picture definition and 
colour purity right into the corners) 

●

high degree of brightness and good contrast 

●

high resolution (1280x1024) for displaying the information content of a conventional 19-inch 
screen with CRT (Cathode Ray Tube) 

●

presentation of up to 16.7 million colours (in conjunction with an appropriate graphics card) 

●

automatic scanning of horizontal frequencies from 30 to 82 kHz and refresh rates (vertical 
frequencies) from 55 to 75 Hz (absolutely flicker-free) 

●

digital screen controller with microprocessor for storing 33 different display modes 

●

freely adjustable colour alignment for matching the screen colours to the colours of various 
input and output devices 

●

convenient operation via integrated OSD (On-Screen-display) menu 

●

 VESA-DDC 

compatibility 

●

VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) - mechanical 
interface to swivel arm and wall bracket) 

●

 plug&play 

capability 

●

power management for reducing power consumption when the computer is not in use 

●

compliance with the recommendations in accordance with TCO’03 

In normal screen mode (dark characters against a light background) the monitor satisfies the 
ergonomic requirements for the GS symbol. 
This operating manual contains important information you require to start up and run your LCD 
monitor.  
A screen controller with VGA interface is required to control the SCENICVIEW P17-1A LCD monitor. 
The monitor processes the data supplied to it by the screen controller. The screen controller/the 
associated driver software is responsible for setting the modes (resolution and refresh rate). 
When putting the monitor into operation for the first time, the screen display should be optimally 
adapted to the screen controller used and adjusted in accordance with your needs (see the 
"Changing the monitor settings" section in the "Operation of the monitor" chapter). 

Target group 

You don't need to be an "expert" to perform the operations described here. Do, however, read the 
"Important notes" chapter in the operating manual of the computer and in this operating manual. 
In the event of any problems occurring, please contact your sales outlet or our help desk. 

Additional information 

Details of how you set the resolution and refresh rate are provided in the documentation on your 
screen controller/the associated driver software.