SCENICVIEW P20W-3/P22W-3
Settings functions
Calls up the
Setup
settings window
Input select
Selecting the input signal
This function is used to select the input signal (VGA, DVI or HDMI).The condition is
that the graphic card used supports this function.
Language
Setting the language for the OSD menu
This function is used to choose between English (default setting), French, German,
Italian, Spanish, Russian, Dutch or Swedish as the language for the OSD menu.
DDC-CI
Activation/deactivation of the DDC-CI
On
= the DDC-CI function is activated (standard setting).
Off
= the DDC-CI function is deactivated.
OSDH-position
Setting the horizontal position of the OSD menu
This function is used to move the OSD menu to the left or to the right.
OSDV-position
Setting the vertical position of the OSD menu
This function is used to move the OSD menu up or down.
OSDTimeout
Setting the display duration of the OSD menu
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is automatically
faded out.
Factory recall
Activating the factory settings
With this function all settings are reset to the factory settings without prompting for
confirmation.
Press the SELECT/MENU button to activate the function. The
Auto Processing
message is displayed.
Displaying information
Calling the
Information
setting window
With this function the model designation, serial number, resolution, H/V frequency,
input signal and polarity of the synchronisation signal are displayed.
20
A26361-K1175-Z120-1-7619, edition 1
