Introduction
Your new LCD (Liquid Crystal Display) monitor SCENICVIEW P20W-3/P22W-3 offers numerous
features and functions, for example:
●
TFT display (Thin Film Transistor; active matrix)
●
minimal space requirements thanks to slim casing
●
optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour
purity right into the corners)
●
high degree of brightness and good contrast
●
high resolution (1680 x 1050)
●
presentation of up to 16.7 million colours (in conjunction with an appropriate graphics card)
●
automatic scanning of horizontal frequencies from 30 to 82 kHz and refresh rates (vertical
frequencies) from 56 to 76 Hz (absolutely flicker-free)
●
digital screen controller with microprocessor for storing 28 different display modes
●
freely adjustable colour alignment for matching the screen colours to the colours of various
input and output devices
●
convenient operation via integrated OSD (On-Screen-display) menu
●
VESA-DDC
compatibility
●
VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) – Mounting
device for swivel arm and wall bracket
●
plug&play
capability
●
digital video inputs (DVI and HDMI) with HDCP
●
power management for reducing power consumption when the computer is not in use
●
compliance with the recommendations in accordance with TCO’03
●
The monitor fulfils all GS (“Geprüfte Sicherheit”, Certified Security) requirements.
This operating manual contains important information you require to start up and run your LCD
monitor.
A graphics card (screen controller) with VGA interface or a digital graphics card with DVI interface or
video signal source with HDMI interface is required to control the SCENICVIEW P20W-3/P22W-3.
The monitor processes the data supplied to it by the screen controller. The screen controller or the
associated driver software is responsible for setting the modes (resolution and refresh rate).
When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs (see the
"Changing the monitor settings" section in the "Operation of the monitor" chapter).
Target group
You don't need to be an "expert" to perform the operations described here. However, please observe
the safety information given in the operating instructions of the computer and in this manual.
In the event of any problems occurring, please contact your sales outlet or our help desk.
Additional information
Details of how you set the resolution and refresh rate are provided in the documentation on your
screen controller/the associated driver software.
For ergonomic reasons, we recommend a screen resolution of 1680 x 1050 when using the
SCENICVIEW P20W-3 and P22W-3 monitors.
Because of the technology used (active matrix) an LCD monitor provides a totally flicker-free picture
even with a refresh rate of 60 Hz.
A26361-K1175-Z120-1-7619, edition 1
1
