Removing and installing components during servicing
52
10600648445, edition 1
Removing and installing the battery
i
How to remove and reinstall the battery is described in chapter "Using your notebook", in
the section "Removing and installing the battery".
Removing and installing the hard disk
Removing the hard disk
►
Switch the notebook off and pull the power plug out of the mains socket.
►
Close the LCD screen so that it locks into place.
►
Disconnect all cables connected to the notebook.
►
Turn your notebook over and place it on a stabile, sturdy, flat surface. If necessary, lay an anti-
slip cloth on this surface to prevent the notebook from being scratched.
►
Remove the battery (see "Removing and installing the battery").
1
►
Remove the screws (1).
►
Pull the cover off the notebook.
►
Then undo the screw from the hard disk.
►
Pull the hard disk by the pulling aids to the left side.
►
Remove the hard disk from the hard disk compartment.