Connecting external devices
50
10600648445, edition 1
Connecting USB devices
On the USB ports you can connect external devices that also have a USB port (e.g. a printer, a
scanner or a modem).
i
USB devices are hot-pluggable. This means you can connect and disconnect devices
while your operating system is running.
USB 1.x has a maximum data transfer rate of 12 Mbit / s.
USB 2.x has a data transfer rate of up to 480 Mbit/s.
Additional information can be found in the documentation for the USB devices.
►
Connect the data cable to the external device.
►
Connect the data cable to a USB port of the notebook.
i
Device drivers
Some USB devices will be automatically recognised and installed by your operating
system. However, newer devices will need to be installed using the supplied CD / DVD.
Always follow the instructions supplied with the device to complete the installation.
Connecting external audio devices
Microphone port/Line In
Via the microphone port you can connect an external microphone to your notebook.
Headphone port/external loudspeakers
Via the headphone port you can connect either headphones or external loudspeakers to your
notebook.
Adjusting the volume
►
Set the desired volume with the key combination
Fn
+
F3
or
Fn
+
F4
.
or
►
To adjust the volume use the Windows volume control from the
Start
menu
- Programs -
Accessories - Multimedia - Volume Control
.