1
Dimensions are in millimeters (inches)
www.fcai.fujitsu.com
Specifications
subject to change
MEMORY CARD CONNECTORS
(PCMCIA CONFORMABLE)
560H SERIES
■
FEATURES
• The connectors conform to the Japan Electronic Industry
Development Association (JEIDA) and Personal
Computer Memory Card International Association
(PCMCIA) standards Ver. 4.
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).
Incorrect insertion is prevented. Hot system plugging is
possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which
components can be mounted) and low-profile connectors
are available.
• In addition to connectors for type I and type II cards, a
connector for type III cards has been provided.
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided
mounting are available.
■
PIN CONNECTOR (PLUG) CONTACT LENGTH
■
SPECIFICATIONS
Item
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric withstanding voltage
Insertion/withdrawal life
Specification
– 55
°
C to + 85
°
C
DC 0.5 A
AC 250 V
40 m
Ω
max (6 VDC, 0.1 A)
1000 M
Ω
min. (500 VDC)
500 VAC for 1 minute
Industrial environment: 5,000 times
Office environment: 10,000 times
Contact type
Power, ground pins
Card detection pins
Other signal pins
Pin No.
1, 17, 34, 35, 51, 68
36, 67
Others
Contact length
5.0 mm (0.196 in.)
3.5 mm (0.137 in.)
4.25 mm (0.167 in.)
■
MATERIALS
Plug body: PPS resin UL94V-0
: 6T nylon (for type III card connector) UL94V-0
Ejector: Polyester
: PPS resin (for SMT and type III card connectors)
Copper alloy
Contact: Gold over palladium over nickel
(PAGOS)
Terminal: Palladium
Specification
Item
Insulating material
Conductor
Plating
