CONTENTS
1 NAMES AND FUNCTIONS OF PARTS
3 SCANNING VARIOUS TYPES OF DOCUMENTS
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
6.4 Checking labels on the scanner
8 DOCUMENT SPECIFICATION OF ADF
6.2 Indications operator panel for errors (Continued from the previous page)
Indication
Meaning
Ec
Memory malfunction
ED
SPC malfunction
EF
Background switching mechanism malfunction
E10
ROM malfunction
E11
Fan malfunction
E12
Heater malfunction
E13
(Reserve)
E14
(Reserve)
E15
Extended memory option malfunction * See ATTENTION as below.
E16
Option board malfunction
E18
Sensor malfunction
E19
LSI malfunction
E1A
Scanner inside communication malfunction
ATTENTION
When the scanner is in trouble, please check as fllows and refer to "9.1 Additional memory board".
1. Is it the right additional memory board?
2. Is the additional memory board set in place?
3. Isn't the additional memory board broken?
4. Are there two additional boards?
When you encounter any alarm, turn off and on the scanner. If the alarm is still displayed on the Function No. display, contact the dealer
where you purchased the scanner or an authorized FUJITSU scanner service provider.
|
All Rights Reserved, Copyright (C) PFU LIMITED 2003