background image

CONTENTS

Introduction

1 NAMES AND FUNCTIONS OF PARTS

2 BASIC SCANNER OPERATION 

3 SCANNING VARIOUS TYPES OF DOCUMENTS

3.1 Scanning double sided documents

3.2 Scanning documents with different widths

3.3 Scanning document longer than A3 size

3.4 Saving scanned images in PDF format

3.5 Selecting a color to drop out

3.6 Skipping blank pages

3.7 Detecting double-feeds

3.8 Correcting skewed documents

4 DAILY CARE

5 REPLACING CONSUMABLES

6 TROUBLESHOOTING

7 ONLINE SETUP

8 DOCUMENT SPECIFICATION OF ADF

9 OPTIONS

10 SCANNER SPECIFICATIONS

Appendix

3.1 Scanning double sided documents

1.  Load documents onto the ADF paper chute.

For details on how to load documents, refer to "

2.3 Loading documents onto the ADF

".

2.  Adjust the side guides to the width of the documents.

3.  Start up ScandAll 21.

At [ Start ] menu, select [Program] - [Scanner Utility for Microsoft Windows] - [ScandAll 21]. This starts up ScandAll 21.

4.  Select the scanner to use.

 1 | 

2

 | 

3

 

All Rights Reserved, Copyright (C) PFU LIMITED 2003

Summary of Contents for 5750C - fi HVRS








































































































































































Reviews: