Fujitsu 5900C - fi - Document Scanner, Getting Started

12

4. Enter required information, then click [Next >].

5. Install the application following the instructions 

in the window.

■

Confirming Installation

1. Load documents on the scanner.

For details on loading documents, refer to "2.6 

Loading Documents on the Hopper" in the fi-

5900C Operator's Guide on the Setup CD-ROM.

2. Start QuickScan Pro

TM

. 

From [Start] menu select [Programs]-[Quick-

Scan]-[QuickScan].

3. Select [Select Scanner...] from [Scan] menu in 

QuickScan Pro

TM

. 

4. And select fi-5900C from the list of [Scanner:], 

and then click [OK] button.

5. Select [Preview Settings...] from the [Scan] 

menu. Set the scan resolution, paper size and 
other scanning parameter, and then click [OK].

6. Select [Preview Scan] from the [Scan] menu. 

And then the document is scanned.

If the scanning completes without any trouble, the 
installation was performed successfully. 

Error Recovery Guide

The Error Recovery Guide is a software that displays 
troubleshooting information on screen if any scanner 
error occurs. 
If you did not install the Error Recovery Guide when 
installing the scanner driver, install it following the pro-
cedure below.

1. Insert the Setup CD-ROM into the CD drive.

⇒

<SETUP DISK STARTUP SCREEN> 
appears.

ATTENTION

"QuickScan Pro

TM

" included in the Setup 

CD-ROM is an trial version. For further use 
after expiration of the trial period (up to 30 
launches), it is necessary to purchase a 
fully functional version of QuickScan

TM

Pro. (When you install the trial version, do 
not change the Serial Number already dis-
played.)

HINT

Refer to "QuickScan Overview" or "Quick-
Scan Help" for information about Quick-
Scan functions and operations. On the 
[Start] menu, point to [Programs]-[Quick-
Scan] and click the file.