Fujitsu 6240 - fi - Document Scanner Operator'S Manual Download

Page: 219 / 241

8.7 Pre-Pick

Select [Yes] to make Pre-pick valid, and select [No] to make it invalid.

HINT

●

By enabling Pre-Pick, faster scanning can be achieved.

●

While Pre-Pick is valid, if you cancel scanning in process, you have to reload the

document after ejecting all the pre-picked document.

●

This setting is also available by scanner driver setting. (In this case scanner driver

setting has a priority.)

file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/08/c08_07_01.htm (2 of 2)9/28/2007 2:38:57 PM

Summary of Contents for 6240 - fi - Document Scanner


















































































































































































































































Search results

Summary of Contents for 6240 - fi - Document Scanner

Reviews:

Related manuals for 6240 - fi - Document Scanner

Brands by name

Popular brands

Fujitsu 6240 - fi - Document Scanner, Operator'S Manual

Search results

Summary of Contents for 6240 - fi - Document Scanner

Reviews:

Related manuals for 6240 - fi - Document Scanner

Brands by name

Popular brands