Connecting external devices
Preparing your AMILO GraphicBooster for use
►
Switch your AMILO notebook on.
►
Log onto the operating system.
►
Connect the AMILO GraphicBooster to the mains supply.
►
Connect a monitor to the HDMI or DVI-I port of the AMILO GraphicBooster.
►
Switch the monitor on.
►
Connect the AMILO GraphicBooster to your AMILO notebook using the supplied cable.
The left-hand status indicator on the AMILO GraphicBooster lights up blue.
►
Follow the instructions on the screen and restart your AMILO notebook when prompted.
The right-hand status indicator on the AMILO GraphicBooster lights up blue.
The desktop of the monitor connected to the AMILO GraphicBooster is set up
as the primary desktop with the number 3.
or
The desktop of the monitor connected to the AMILO GraphicBooster is set up
as the secondary desktop with the number 3.
While the drivers for your monitor are being installed, the monitor
may turn black or
fl
icker for a short time.
62
A26391-K90-Z200-1-7619, edition 1
Summary of Contents for AMILO M Series
Page 1: ...Operating Manual English AMILO Notebook ...
Page 3: ......