((
Copyright© 2010, 2011 Fujitsu General Limited. All rights reserved.
Settings
Basic Settings
6.
In this section, the basic settings necessary before use in the PC are explained. The settings that are also
necessary when equipment configuration changes are also explained here.
When starting the system for the first time after installation, make the settings in accordance with the flow
described below. At the 2nd and subsequent starting, make the necessary settings in accordance with sub-
sequent paragraphs, as required.
When Starting for the First Time
6-1
When starting the BACnet
®
Gateway for the first time, perform the settings in accordance with this flow.
Setting for First Time Use
●
Cancel
OK
Cancel
OK
Cancel
OK
OK
6-5 “Adaptor Setting”
Transmission adaptor selection
●
Transmission Adaptor Name setting
●
Transmission line connection confirmation
●
Main screen
BACnet
®
Gateway program ends.
(When Cancel is selected, Setting is stopped.
Setting must be repeated from the beginning.)
BACnet
®
Gateway
program ends.
(b)
Cancel
OK
(a)
6-2 “Selection of Unit Data Acquisition Method”
To perform “Adaptor Setting”. .............................(a)
To import backed up data. ..................................(b)
6-3 “Login Setting”
6-4 “Initial Setting”
6-6 “Unit Registration”
Scanning range
●
Device confirmation
●
Cancel
OK
Items Which Can Be Arbitrarily Set
●
6-7 “Description Property Setting”
6-8 “Change Password”
Summary of Contents for BACnet UTY-ABGX
