19
2.2 Notes on safety
Note regarding radio interference suppression
Important alert messages
Warning
Possible damage to the system if used incorrectly
Be sure to follow the precautions below when installing the equipment. Otherwise, the business server may be
damaged.
Possible damage to the system if used incorrectly
In the factory all the power cables are connected to the power distribution units which are integrated into the rack.
Attach the connection cables of the multiple socket outlets to the in-house installation so that they are easy to
access.
Do not connect any additional consumer loads to the power distribution units - this could cause the nominal load
capacity of the multiple socket outlet or feed cables / fuses to be exceeded! If you want to connect additional
equipment, please contact Customer Support.
Possible data loss if used incorrectly
Before shutting down power, you should ensure that the following events occur; otherwise data may be destroyed.
All applications have finished processing.
No user is using the components.
When a unit of the SE server (MU, SU, HNC or AU) is turned off, the operating status indicator lights up orange.
Check this before shutting down the main power (to UPS, power cable, and power distribution box).
If necessary, back up files before shutting down.
WARNING!
This is a product which meets Class A of EN55022. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
!
CAUTION!
This alert signal indicates a hazardous situation that could result in minor or moderate personal injury if
the user does not perform the procedure correctly. This signal also indicates that damage to the product
or other property may occur if the user does not perform the procedure correctly.
!
