Troubleshooting and tips
Service door cannot be closed
The service door (1) can no longer be closed after the installation/removal of system expansions.
1
Cause
Remedy
The locking mechanism of the service door has
not been pressed before closure.
►
Press the locking mechanism of the service
door (see
Time and/or date is not correct
Cause
Remedy
Time and date are incorrect.
►
Set the correct time and date within the
operating system you are using.
or
►
Set the correct time and/or date in the
BIOS Setup
.
The lithium battery is discharged.
►
If the time and date are repeatedly wrong
when you switch on your device, replace the
lithium battery (see
).
Error messages on the screen
Error messages and their explanations are provided:
•
in the technical manual for the mainboard
•
in the documentation for the programs used
Fujitsu
39