background image

 

GNU GENERAL PUBLIC LICENSE

 

Fujitsu 

69 

16. Limitation of Liability. 

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL 
ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE 
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY 
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE 
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA 
OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD 
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), 
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES. 

17. Interpretation of Sections 15 and 16. 

If the disclaimer of warranty and limitation of liability provided above cannot be given local legal 
effect according to their terms, reviewing courts shall apply local law that most closely approximates 
an absolute waiver of all civil liability in connection with the Program, unless a warranty or 
assumption of liability accompanies a copy of the Program in return for a fee. 
END OF TERMS AND CONDITIONS 
 
 
 
 
 
 

Summary of Contents for celvin nas












































































Reviews: